안목 있는 전문가들의 선택 | 최상의 성능, 가치와 믿음

HT-150

1 x 5 HDMI to HDBaseT Distribution Amplifier


The HT-150 1x5 HDMI over HDBaseT Distribution Amplifier offers a simple solution for single source to multiple display distribution up to 330 ft. over a single category CATx cable.
 

 

Do More, Go Further…

The HT-150 provides distribution of HDMI over four HDBaseT outputs, extending HDMI up to 330 ft (100 m) to four remote locations over a single category CATx cable. An additional HDMI output allows confidence or local monitoring, a feature not offered by other brands. The HT-150 also delivers immediate system analysis with status LEDs that indicate signal present on the input and display sensing on the outputs, an exclusive diagnostic only offered by PureLink’s HDTools™ line.

 

The PureLink Advantage

PureLink innovations in EDID management are carried on in the HT-150, allowing the operator to enable any of the outputs EDID to communicate the signal requirements to the source device, or select the internal 1080p EDID to ensure successful operation regardless of EDID information from any of the connected displays. Extend your infrared in either direction with the included infrared repeater and transmitter. Optional extenders, such as the HCE II Rx are fully compatible with the HT150, including infrared functions, allowing infrared control of remote displays, sources, or other IR devices.

 

Key Features

  • Distribute a single source to five (5) displays
  • I/O Ports: 1 x HDMI IN, 1 x HDMI OUT, and 4 x CATx OUT (HDBaseT)
  • Extend a single source at 1080p up to 330ft over single category CATx cable with PureLink’s HDBaseT extender receivers
    (Note: the HCE II Rx supports max distance of 230 ft.)
  • Direct compatibility with PureLink’s HDBaseT extender receivers, eliminating the need for matching transmitters
  • Supported resolutions: uncompressed high definition video up to 1080p@60Hz
  • HDMI v1.3 with 3D support
  • HDCP compliant
  • Local HDMI output for in room display, AVR, or cascading to another distribution amplifier
  • IR control for remote locations

General Technical Specification of HT-150

Model

HT-150

Input type

HDMI 1 port,  IR 1 port

Output type

HDMI, 1 port, CATx, 4 ports, IR, 1 port

Graphic Resolution

VGA / SVGA / XGA /UXGA / WUXGA
480i/p , 720i/p , 1080i/p

HDBaseT Output Distance

330ft (100m) with HTR Rx
230ft (70m) with HCE II Rx

HDBaseT IR Carrier Frequency

30 ~ 60 KHz

HDBaseT IR Emitter/Receive angle

Tx: -30° C~+30° C          Rx: -50° C~+50° C

HDBaseT IR Emitter/Receive distance

16 ft (5m)

Connector type

HDMI 19 Pin Female

RJ 45

3.5mm Phone Jack (for IR)

DC Power Jack

Supported format

HDMI 1.3

HDCP Compliant

Yes

Power Supply

DC +12V , 4.2A

Dimension (W x D x H)

9.97” x 5.7” x 1.57” (253 x 145 x 40 mm)

Weight

1.9 lbs (0.86 kg)

 

 

Technical Documentation

Description

Version

Size

Format

Updates Date

Manual

User Manual

V1.0

667KB

PDF

Oct.2014