안목 있는 전문가들의 선택 | 최상의 성능, 가치와 믿음

PM-CT104-U
PM-CT104-U

4K HDMI to CATx (HDBaseT) Transmitter


The PM-CT104-U provides switching  HDMI  via HDBaseT. Uncompressed HD Video, audio, and control signals are available up to 330 feet (100 meters) over a single CATx with IR and RS232.
 

 
Purelink is proud to announce the new single CATx (HDBaseT) extension system called PM-CT104-U and CR104-U, a part of new PM series extender. PM-CT104-U and CR104-U are a transmitter and receiver set for long distance transmission of video, audio, and control signal with POE (CR104-U doesn't support POE). PM series CATx (HDBaseT) extension system is designed to transmit video (DVI, HDMI and VGA), audio (Embedded or analog stereo audio), control (RS232/422 and IR), and power over a single CATx cable for long distance up to 330ft (CR104-U doesn't support POE). This CATx connection enables to minimize electrical noise and EMI free that is ideal for long distance extension of high definition HDMI/DVI video signal, HDMI embedded audio or 3.5mm stereo analog audio, and control signal with POE (CR104-UCR104-U doesn't support POE).
Operating Distance

CAT 5e/6/7 UTP or

STP Cable 

 330ft (100m) for 2Kx2K

230ft (70m) for 4Kx2K@30Hz

NOTE   Operating distance is appropriate. This is a typical distance. The Maximum distance may be greater than these typical numbers depending on factors such as CATx type, bandwidth, connector splicing, bend radius and environment factors.

HDBaseT Technology

 Yes

   
Video Information
Maximum Channel Data Rate 10.2Gbps(3.40 Gbps per color)
Maximum Pixel Clock

300MHzz

Maximum Supported

Resolution

4Kx2K@30Hz

Formats

HDMI w/ Deep Color, 4K; HDCP Content Protection Support
Connector 1 female HDMI, 1 female CATx
EDID Interface Pass-through
Audio Information
Input Signal Types HDMI
Output Signal Types HDMI
Formats

Dolby Digital, Dolby Digital EX, Dolby Digital Plus,

Dolby TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res,

DTS-HD Master Audio UP to 8ch PCM

Control / Remote  Information
Serial Control Port   
Transmitter 3 Pin female phoenix connector (Tx,  Ground, Rx)
Receiver 3 Pin female phoenix connector (Tx,  Ground, Rx)
Baud Rates Up to 115200 baud
RS-232 +

RS-232 + enables a single cable connecting the controller to a PM series Matrix Switcher to also control the system on three separate levels:

1)      PM series Matrix Switcher

2)      PM series HDBaseT and Fiber Extenders (both Tx, Rx)

3)      Devices attached to PM series Extenders (both Tx, Rx)

 Protocol

Date bits = 5-8

Stop bits = 1 or 2

Parity = odd, even, none

Flow control = XON, XOFF, none
General Information
 Power Supply  Ext. adapter – Input : 100-240 VAC, 50-60Hz, Output 12VDC, 4.1A, 10 watt(max)
Note  Both transmitter and receiver extender don't need to be powered because of the POE feature.
LED Indicator  Upper (Signal LED), Down (Link LED)
RS-232+  Support is available with PM frame
Mounting Mounting ears for ceiling and in-wall installation
Dimension 113mm (w) x 73mm (d) x 29mm (h)
Weight 0.59lbs (0.27Kg)
Note  All nominal levels are at ±9%
Note  Specifications are subject to change with or without notice.